• GX53 Lamp cap gauge  | Go and Not Go Gauge for Checking Keyways in Caps GX53 , 7006-142E-1
ราคาดี GX53 Lamp cap gauge  | Go and Not Go Gauge for Checking Keyways in Caps GX53 , 7006-142E-1 ออนไลน์

GX53 Lamp cap gauge | Go and Not Go Gauge for Checking Keyways in Caps GX53 , 7006-142E-1

รายละเอียดสินค้า:

สถานที่กำเนิด: dongguan จีน
ชื่อแบรนด์: kingpo
ได้รับการรับรอง: iso9001
Model Number: 7006-142E-1

การชำระเงิน:

Minimum Order Quantity: 1
ราคา: To be quoted
รายละเอียดการบรรจุ: กล่องกระดาษนิรภัยหรือกล่องไม้อัด
เวลาการส่งมอบ: 7 วันทำการ
Payment Terms: T/T
สามารถในการผลิต: 1000 ชิ้นต่อเดือน
ติดต่อตอนนี้

ข้อมูลรายละเอียด

ชื่อแบรนด์: Kingpo Model Number: KP-7006-142E-1
Material: Hardness Steel Standard: IEC60061-3
แสงสูง:

Go No Go Gauge

,

Iec 60061 3

รายละเอียดสินค้า

 

GX53 Lamp cap gauge | Go and Not Go Gauge for Checking Keyways in Caps GX53 , 7006-142E-1

 

PURPOSE: PURPOSE: To check caps GX53-1 in the following respects:
- correct keyway position in relation to cap pins;
- the minimum height and width of the keyway (dimensions W and X2);
- to prevent the possibility of insertion of only one pin.


TESTING: It shall be possible to insert the cap into the gauge until the reference plane of the cap is in contact with surface Y of the gauge. It shall then be possible to turn the cap into contact position.
It shall not be possible to insert only one pin of the cap into the gauge and turn the gauge into contact position.

GX53 Lamp cap gauge  | Go and Not Go Gauge for Checking Keyways in Caps GX53 , 7006-142E-1 0

Related gauges for GX53

 

7006-142-1
"GO" AND "NOT GO" GAUGE FOR CAPS
GX53 PURPOSE: To check caps GX53-.. in the following respects:
- the diameter of the individual pins (dimension A);
- the combined displacement and diameter of the pins (dimensions A and D);
- the length of the pins (dimension F1);
- the recess length and diameter of the pins (dimensions F2 and E);
- the maximum cap outline with respect to dimensions M, L1 and K.
7006-142D-1
"NOT GO" GAUGE FOR CAPS
GX53 PURPOSE: To check the minimum cap diameter (dimension L1) of caps GX53-..
7006-142E-1
"GO" AND "NOT GO" GAUGE FOR CHECKING
KEYWAYS IN CAPS
GX53 PURPOSE: To check caps GX53-1 in the following respects:
- correct keyway position in relation to cap pins;
- the minimum height and width of the keyway (dimensions W and X2);
- to prevent the possibility of insertion of only one pin.
7006-142F-1
"NOT GO" GAUGE FOR CHECKING KEYWAYS IN CAPS
GX53 PURPOSE: To check the maximum keyway width (dimension X) of caps
GX53-..

ต้องการทราบรายละเอียดเพิ่มเติมเกี่ยวกับผลิตภัณฑ์นี้
ฉันสนใจ GX53 Lamp cap gauge | Go and Not Go Gauge for Checking Keyways in Caps GX53 , 7006-142E-1 คุณช่วยส่งรายละเอียดเพิ่มเติมเช่นประเภทขนาดปริมาณวัสดุ ฯลฯ ให้ฉันได้ไหม
ขอบคุณ!