• E27 Lampholder gauges | "GO" Gauge For Lampholder E27 | 7006-25A-2
ราคาดี E27 Lampholder gauges | "GO" Gauge For Lampholder E27 | 7006-25A-2 ออนไลน์

E27 Lampholder gauges | "GO" Gauge For Lampholder E27 | 7006-25A-2

รายละเอียดสินค้า:

สถานที่กำเนิด: dongguan จีน
ชื่อแบรนด์: kingpo
ได้รับการรับรอง: iso9001
Model Number: 7006-25A-2

การชำระเงิน:

Minimum Order Quantity: 1
ราคา: To be quoted
รายละเอียดการบรรจุ: กล่องกระดาษนิรภัยหรือกล่องไม้อัด
เวลาการส่งมอบ: 7 วันทำการ
Payment Terms: T/T
สามารถในการผลิต: 1000 ชิ้นต่อเดือน
ติดต่อตอนนี้

ข้อมูลรายละเอียด

ชื่อแบรนด์: Kingpo Standard: IEC60061-3
HRC: C58 To C60 Material: Hardness Steel
แสงสูง:

Go No Go Gauge

,

Go And Not Go Gauge

รายละเอียดสินค้า

E27 Lampholder gauges | "GO" Gauge For Lampholder E27 | 7006-25A-2

 

 

Purpose: to check

a) the minimum dimensions of the lampholder screw thread according to sheets 7004-21 and 7004-27

b) dimension X according to sheet 7005-20

c) the machnical compatibility of the lamp holder with respect to lamps have adverse dimensions

 

Testing: It shall be possible to screw the threaded part of the gauge into the lampholder without using undue force.

when the gauge has be screwed in as far as it will go, mark Y on the plunger shall be co-planar with mark A on the shaft.

the sleeve is then placeed over the shaft of the gauge with its open end resting on the top edge of the screw shell of the holder. with the sleeve in this position, the plunger is pushed down as far as it will go.

surface B of the gauge shall then lie between the marks X1 and X2 on the plunger or be co-planar with either of them; it shall not lie beyond them.

 

Related gauges for E27 lamp holder:

E27 lamp holder gauge "GO" GAUGE FOR LAMPHOLDERS E27 7006-25A-2
NOT GO”GAUGE FOR SCREW THREADS OF LAMPHOLDERS E27 7006-26-4
GAUGE FOR TESTING PROTECTION AGAINST BULB-NECK DAMAGE AND FOR TESTING CONTACT-MAKING IN LAMPHOLDERS E27 7006-21-5
GAUGE FOR TESTING CONTACT-MAKING AND PROTECTION AGAINST ACCIDENTAL CONTACT DURING INSERTION OF LAMPS IN LAMPHOLDERS E27 7006-22A-5
GAUGE FOR DETECTING SIDE-CONTACTS WITH CUTTING-EDGES IN LAMPHOLDERS E27 7006-22B-1
GAUGE I FOR CHECKING SIDE-CONTACT RESILIENCY IN LAMPHOLDERS E27 7006-22C-1
GAUGE II FOR CHECKING SIDE-CONTACT RESILIENCY IN LAMPHOLDERS E27 7006-22D-1

 

E27 Lampholder gauges | "GO" Gauge For Lampholder E27 | 7006-25A-2 0

ต้องการทราบรายละเอียดเพิ่มเติมเกี่ยวกับผลิตภัณฑ์นี้
ฉันสนใจ E27 Lampholder gauges | "GO" Gauge For Lampholder E27 | 7006-25A-2 คุณช่วยส่งรายละเอียดเพิ่มเติมเช่นประเภทขนาดปริมาณวัสดุ ฯลฯ ให้ฉันได้ไหม
ขอบคุณ!